When buying a villa or a plot, any owner first of all places a toilet on it. The modern market offers a large assortment of ready-made facilities, but not everyone wants to spend additional funds. It is possible to make such constructions independently, it is only necessary to adhere to the obligatory general rules. The main thing is to determine the location of the toilet. There are norms on the basis of which the structure cannot be located closer than 30 meters from the source of drinking water. The residential building should be no closer than five meters from the toilet, and the meter area defines the boundaries of the site. The relief of the terrain also plays a role, because the toilet is not connected to a common sewer system. You need to build a structure below the level of a well or well. Unpleasant odors eliminate the analysis of the wind rose. In the presence of a cesspool, you must provide access to the entrance of the machine to empty it. The choice of a particular type of toilet depends on the level of groundwater. If the deepening of more than 3.5 meters is undesirable, the choice should be stopped on the bio-toilet. Of course the most common option for giving is a toilet with a cesspool. Feces fall directly into the pit, from where they are pumped out when it is filled. Often, the pit after they just fall asleep and build a toilet in a new place. This structure is simple, the house can be made portable and put it on a new pit every 2-3 years.
The pit is made 2 meters deep by the depth. It is necessary to overlay it with brick or lumber. It is possible to adapt as an waste collection container an old barrel or tires laid on top of each other. It is better to make a good waterproofing, which will prevent the destruction of the structure by groundwater. The bottom is concreted, you can make a pillow of rubble or gravel. This type of insulation will prevent contamination of groundwater.
The house can be made of wood, but must be fixed with a concrete base. You can not put it directly on the ground – the material will rot. All wooden parts must be treated with a special composition against decay. First of all, stands that are attached with metal plates are installed. It is necessary to take into account the slope of the roof, the rear pillars are made shorter than the front. The roof is installed on the beams. The house can be covered with slate, having made before it a layer of roofing material.
The flooring is important to make durable, the toilet must withstand the weight of a person. The lining of the inner part can be made by lining, plastic or even polyethylene. The main thing is that the building is not blown. For convenience, it is necessary to carry out lighting. If the electricity is problematic, then you can use the lights on batteries.
The main problem of the toilet is an unpleasant smell. Of course, it is impossible to get rid of him, but it is quite possible to reduce the intensity. It is necessary to ensure the construction of good ventilation by installing a sewer pipe. It is inserted to a depth of 10 cm in the cesspool and is displayed on the roof of the building with a free end. Pipe joint must be insulated with bitumen based mastic. A tight lid on the toilet seat will help reduce the odor. A more complicated option is the loft closet. The facility is installed on a cesspool, which must be periodically devastated. The toilet is located usually in the building and is a standard bathroom. The waste collection is located outside the house and consists of two parts. The top is equipped with hatches for cleaning.
Increasingly, summer residents are using a bio-toilet on the site. The waste collection container can be periodically filled with soil or earth, which will eliminate the unpleasant odor.
How to build a toilet in the country