Garden paths with own hands

Garden paths with own hands

Garden paths with own hands

It is difficult to imagine a site without equipped tracks on it. Even dew can become an obstacle to movement. Such an element as the tracks will be an excellent complement to landscape design, will change the cardinal appearance of the yard. Self-made tracks will please the owner even more, reminding of the result of his time and effort.

A reliable option for building paths in the garden is a natural stone. The material laid out in the path fascinates with its beauty, but the price can scare away even the true lover of landscape art. You can use the remnants of building materials, which was used in the lining of the building. This track is reliable and will last a long time. To lay this material, no additional soil preparation is required. The stone can be laid on the ground, making a sand pillow.

First of all, large elements are laid, and then free areas are filled with cut stone. The distance between the material can not be filled, then it overgrew with grass. This track looks natural.

Garden paths with own hands

A simple and affordable option is filling tracks. For their construction, it is sufficient to dig a hole along the perimeter of the path and lay it with geotextiles. The contour of the path must be laid out with a curbstone or a border ribbon.

After a layer of rubble is filled. You can use as a final cover and a small stone, pebbles or screenings. The material is well leveled and compacted by a vibrating machine. You can put a layer of concrete slab on top.

Fillways can sustain significant loads. For this, a concrete base is made, on top of which a layer of tile or wild stone is laid. It is better to make a path above ground level, which will prevent it from the negative impact of moisture.

The paths from the spits of the tree look warm and cozy. The process of laying this material is simple, the main thing is to make the base correctly. Spin should be at least 15 cm thick to withstand the load. The material is laid on gravel or sand, pre-compacted. The spili can be treated with a protective material that will not allow pests to damage the path.

Rotting and humidity can be avoided by treating the wooden elements with fuel oil or another bitumen-based agent. It is not difficult to make the sprouts yourself from old trees, even thick branches will do. Before filling the base, it is necessary to protect the bottom with geotextile.

Garden paths with own hands

Sidewalk tiles are reliable and withstand heavy loads. Today, this material can be purchased inexpensively, and laying alone. The main thing in the process to achieve an even surface, for this you need to constantly use the level.

First of all, you need to properly design garden paths and make appropriate markings. On the markings, a curbstone is installed, which restrains the path from sprawl. The top layer of the soil must be removed and put a layer of rubble on it, the mound is leveled. The surface is laid with geotextile, and the top is covered with sand and cement.

You must start from the right corner of yourself. Each element is rammed using a rubber hammer. The surface is covered with whole elements, in the end the missing pieces are cut from the whole tile. The gap between the tiles is left 1-2 mm, after the end of work all the voids are covered with a mixture of sand and cement. Ready-made clutch should be filled with water, so that the mixture has shrunk and rammed. The laid out track will last a long time, do not save on the quality of the material used.




Garden paths with own hands