Fence from the corrugated board with your own hands

Fence from the corrugated board with your own hands

Fence from the corrugated board with your own hands

Today, corrugated board not only serves to cover the roofs, but it is also successfully used for building a fence. This building material was not of great value for enclosing plots because of its not attractive appearance.

Now the corrugated board is covered with a layer of polymer, which increases its quality and gives color. Such material will advantageously complement any yard economy.

The popularity of this material is due to the ease of assembly of the fence, even an inexperienced worker can cope with this technology. For the erection of the fence, the material intended for fencing is needed, the roofing sheets have a high comb. Racks can be made from logs or metal pipes.

For ease of assembly of the building, metal columns of square section are best suited, sheets are most conveniently attached to them. As diameters, it is better to purchase rectangular pipes 60 × 25 mm.

Fence from the corrugated board with your own hands

Before buying, you need to make a calculation and determine the amount of material required. How to calculate the number of sheets is understandable, but the height of the pillars must be calculated based on the height of the fence and the part to be digested. In the ground you need to load 30% of the height of the column. The supports should be placed 2-2.5 m apart. Widths with a fence height of up to 2 m are stacked in two rows, at a higher height, one more row is added.

First of all, you need to make a marking for the pillars. You will need deepening, the first pillar is placed near the gate. Digging can be an old method, using a shovel, but a garden drill is best for this. The depth should be calculated taking into account the layer of the pillow in the form of gravel. Next, you need to prepare a concrete solution.

Supports are exposed vertically and are concreted. To force the solution out of the solution, use a conventional bayonet shovel. By typing, it is possible to increase the coupling properties of the mixture. The simplest recipe for concreting solution is a mixture of one part of cement (M400) with four parts of gravel.

Fence from the corrugated board with your own hands

After completing the concreting process, you need to leave the poles until the fixing mixture dries completely. Attach transverse elements in several ways. A lasting option is to weld horizontal elements, but without special preparation, this task will not be easy to handle.

You can fasten the elements with bolts. To do this, through holes in the sheet are made and fastened with a bolt and nut. The diameter must be set at least 20 cm from the ground. The sheets begin to be installed from the gate. The material is fixed to the cross-section by overlapping a single wave.

The top of the pillars is better closed, preventing accumulation of moisture, which will entail the erosion of the fixing solution. For this you can make peaks or caps. Under the fence it is desirable to make a concrete blind area, which will serve as an excellent drainage device, the main thing is to correctly determine the direction of the stack.

It is necessary to choose the color gamut of the material in accordance with the whole concept of the site and buildings. The fence should complement the aesthetic picture and not spoil the view. Do not save money on the purchase of quality materials for the design. Such a facility is installed for many years, so the risk of savings is not justified.

Independently to collect a fence from a professional flooring it is possible, the main thing to adhere to an algorithm of actions. Do not rush, it is necessary to give the fixing solution to dry well, then the construction will not fall and will not warp. You can supplement the fence with decorative elements, such as peaks, protective slopes or even add artwork.




Fence from the corrugated board with your own hands