Despite a sufficient range of chicken meat, these birds are increasingly bred at home. Homemade meat and eggs are both healthier and tastier. Care for chicken is not particularly difficult, but basic devices are needed to ensure their livelihoods. One of these elements of the economy are feeding troughs for chickens. You can buy ready-made designs, but more rational bird owners make feeders themselves.
To save time for feeding birds, it is better to place feeders with automatic feed. It is very simple to adjust the polymer pipes, for this it is enough to connect a part of the pipe to the knee. The top is filled with grain and the edge is closed with a lid or a hood. When eating grain, the voids are filled with the next portion of the food.
Thus, the chickens themselves control the supply of grain to the feeder. This device does not take up much space and is positioned vertically. The main thing is to select the support reliably and secure the containers correctly. Pets should be free to approach the source of food. It is necessary to calculate the number of feeders needed for feeding birds. The height of the structure should be sufficient so that the grain does not scatter over the corral.
An inexpensive option is to make a feeder from a plastic bucket. It takes a bucket with a lid, in which several holes are made. As a collection, you can use a sectional bowl for dogs.
The number of holes should correspond to the number of sections. The bucket and the base are tightly fastened, the buried feed under gravity enters the sections and fills the feeder. Mounting should be reliable, and enough holes to feed the brood.
For the construction of primitive feeders suitable for such materials:
- plastic cans; large polymer milk bottles; containers from oil.
It is better not to use packaging from petroleum products, such containers may be dangerous for the health of chickens. The container is thoroughly washed and cut out the wall opposite the handle. For the handle tie the trough to the net at a level convenient for feeding. It is undesirable to put the device on the ground, it is better to firmly fix it on the weight.
Plywood is made of single-section and multi-section feeders. The installation scheme is simple, you need to split the plywood box into sections and attach the bottom, which will be 2-3 cm below the edge. The height of the gap depends on the size of the feeder. The protruding part must be protected by side walls.
The food is filled from above in a box and under gravity enters a hole. Such devices are often used for mixed fodder and grain. The feeder reduces feed consumption, since birds do not trample it. The box can be attached to the wall, and the top to be closed with a protective wall, then the feeder will be stable and the birds will not be able to turn it over. It is possible to place such sources of food around the perimeter of the pen, thereby ensuring an unhindered approach for birds.
Feeders can be made from food plastic, large bottles from under the water will do. You need to take two large buckets of plastic and make holes in them. Cutouts must match the physical parameters of the chicken’s head. For symmetry, you can use a template.
The limiter for the feed can be made from a piece of polymer pipe. To do this, using a jigsaw, you need to cut out the segments. The element should have the shape of a crown, which will not allow the capacitance to touch the bottom of the bucket. After the bottle is filled with food, putting on a limiter with a bucket, turn over.
The feeder can be made from any strong packaging, the main thing is to secure it securely. The use of such devices significantly reduces feed consumption and saves time spent on feeding pets.
Feeders for chickens own hands